|
Shows the mast base, and why my jib sheets always snag when tacking....
pictures the jib block bridle. It works - but is a toe breaker, and rubs on the motor when in the down position.
Shows the Spinnaker attachment and tack downhaul, the red lines control the tack position. shows the small solar panel, and the Navico TP1800 in action. Ideally, the Navico shaft needs a 50mm extension.
is a new electric's panel under the starboard hatch where I can access it without going below. The DP9 plug will link
the GPS into a PC for nav work.
Shows the mast base, and why my jib sheets always snag when tacking....
|
|