On the stern putting inner stringer instead of outer stringer

On stern inner stringers with cabin sides glued

Adjusting the height of the stringers according the possibility to camber the 6mm plywood

Port hull the height of the center is up 30cm higher

Ready to glue the panels.

Starboard hull

The bow is filled with foam. All the foam can be put off from the hatch

View of the extra height of the center cabin with extra 30cm height

Center cabin with inner stringer on the outer side. Windows will be larger than previously.

The center cabins the floor will be higher with the possibility to adjust the height at three different levels acccording the cargo necessary.